Music ———————————– 1. Song: Apparitions Stalk the Night – Artist: RockGirl soundtrack – 2. Song: To Die For – Artist: Impaled – 3. Song: Maggot Hatchery – Artist: Ghoul – 4. Song: Elevator Music – Artist: Golden Eye 007 Soundtrack – 5. Song: Bleed – Artist: Meshugguh – ———————————- So! I know that the next Abomination video was expected, but this cast had been lying around my room for the longest time and I simply just had to paint it. Came out much better than I even expected it to! Compared it to the first cast to see how far I’ve come. I noticed a shit load of self improvement haha! It really made my day. As far as Abomination, I probably won’t be able to paint him for a couple of day. My sculpting final is next week and I’m trying to hurry it along so I can get back to mask making. Hopefully I’ll be done soon. I may paint other masks in between Abomination such as Cynical Circus, Ghost, Facial Infestation, Silent Soul, and Shadow. I have one blank of each of those masks and I thought I’d test out my airbrush on some old casts and compare them to my old masks. Should be fun! As far as the un-named mask, still having a tough time naming the damn thing haha! I got tons of suggestions on the video to choose from. How will I pick? I have no clue haha! I haven’t gotten to working on the sculpt either, but I will in my spare time. If I’m not airbrushing a mask. Which do you like better? The old version of “ThE HoRRoR” or the newer …

At what ratio (water:paint) should I dilute my airbrush paint? I’m using createx water based paint with a master airbrush, with a 0.2 needle. Also, what is a good psi to use with my compressor, so I don’t get a lot of overspray when doing T-shirts and other art.

My fiance has spray tanned me around 10 times. We have used clear tanner and bronzed tanner. We’ve used a Badger airbrush, a Husky touch-up paint gun and a regular car spray gun. We use a 15 gal. air compressor. The result is usually satisfactory.
My problem is that on the sites that I’ve looked at for tanning solutions say that it takes 2 to 3 ounces of solution to do one full body tan. When I tan it usually takes around 8! I know that there are alot of factors that could be determining that but I don’t know what we are doing wrong??
I’m 5’6" 125lbs, the psi is set at 40, the solution is at factory consistency, also we’ve been using siphon feed not gravity. Is that wrong? Any suggestions welcome, thank you!

i’ve tried water, water-based paint, unclogging the needle, and re-attaching the hose and the bottle, what could be wrong? It’s not a gravity airbrush (though i wish it was, but oh well) and the compressor doesn’t have a gauge on it, so I don’t know what PSI it’s at, or why it’s not sucking the paint or water. I’ve tried my other airbrush and it’s the same result (same kind of airbrush, by the way)

Is there a reason it’s not spraying? I mean, all i’m getting is air.

I’m using a testors blue mini compressor that just came in yesterday, and i’ve got everything hooked up correctly.
Please help me!

Does anyone know the required PSI compressor to work the Paasche VLS Airbrush, i am trying to find out if this compressor would work.
* Auto-stop function 45/55 PSI

* Moisture Trap / Regulator 1/4" outlet

* Motor 1/5HP Air Delivery 23LPM

* Max Pressure 55PSI / 3 Litre Holding Tank

* Noise Rating a low 50DB

* Weight 7kgs , Dimensions 35 x 17 x 34cms
Heres the link to the compressor, http://cgi.ebay.com.au/Artlogic-Mini-Compressor-on-Tank_W0QQitemZ270277780253QQcmdZViewItem?hash=item270277780253&_trkparms=72%3A975%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14#ebayphotohosting

Is this compressor worth it, if no what do you reccomend?

I air brushed a model kit and it has a rough finish to it. any tips on smoothing it and getting a nice gloss finish ? I sprayed enamel at 25 psi, with a 40/60 mixture

I am currently looking into buying an Airbrush system for personal use (for now) and i was considering getting a kett jet compressor however the only information i can find on it is about the old compressor which had a much lower psi rang than the new one.

any info you could give would be great, or even a recommendation for a product other than ketts,

I would get a Dinair, however to me when the Dinair does eye color it looks,,,less than perfect,

Music ——————— 1. Song: Big Sur Moon – Artist: Buckethead – 2. Song: Hiiro No Sora – Artist: Shakugan no Shana – ————————————– So! Finished sculpting Shadow! I must say he looks pretty damn awesome! I have big plans for the mask itself. I won’t just be using paint on this mask. I’ll be using some other materials to make him look rustic and worn. In this video, I show the things that I would usually show in two separate videos. The entire molding process + the slip casting of the mask. I will apply the other layers of latex off camera. The mask needs another layer or so, and It’s set. Another day or two and I’ve got myself a new Shadow. Looking forward to that day. In other news, got the other sculpt sitting in my room now. Don’t know what the hell to call him. He might not be a devil. I might change him, AGAiN! Haha. We’ll see what happens. Stay tuned! ~Shadow

I have a badger 150…and i need an air compressor…i want to do shoes, shirts, hats, cnavases whatever…i saw a compressor tht had 48 psi….is that too low or just enough….?

Im getting an iwata HP-BCS and im looking for a cheaper compressor than the oe i have in mind. Its called the Smart Jet, about 5. i read on the internet that if youre on a tight budget (which i am) then spend your money on a good airbrush, a fancy compressor is just like a normal one. Is there a cheaper compressor than the Smart Jet? It doesnt really have to be Iwata. And also, i read that this airbrush runs at 25 psi. im looking for a compressor thats around 50 to 60 psi.
No CO2 tanks!!